Loading Film on the Polaroid ProPalette 7000:

1. Open the front panel of the slide shooter to reveal the camera back
2. Press down the "film door release lever" to open the film door.
3. Insert the film into the camera and advance the film-leader to the mark indicated in the camera.
4. Close the camera back and the machine should advance the film and display the message "Ready... ## Frames of ## left".

• If "Out of Film" is not displayed after shooting your film, do the following:
1. Press the  key to display the "Change Setup?" menu.
2. Press the key until the display says "Rewind Film"
3. Press the key to rewind the film.

1. Remove and install the film like a normal 35mm Camera by pushing the film door release lever on the left side of the camera back
 

---

CSB Home | Search | Table of Contents | General Information

Center for Structural Biology (www.csb.yale.edu), Yale University (www.yale.edu)  Contact: webadmin(at)mail^csb^yale^edu Last Modified: Thursday, 03-Jun-1999 11:53:19 EDT